Posts Tagged ‘birthday’

What a fantastic kit! You get a whopping 8 yards of ribbon of varying textures! Click here or on the image above of the ribbon kit to be directed to the SNS store to buy.

I crocheted this amigurumi styled snowman ornament and trimmed it with the pom pom ribbon.  I think the pom pom ribbon adds to the playfulness of this little guy.

Supplies: free pattern from RoxyCraft, Lion Brand yarn, Misc. eyes, & of course the SNS December Mistletoe and Berries ribbon kit.

Here’s a paper origami Hello Kitty ornament I created.  This took way longer than I expected, but it was fun to dress her up!

Supplies: free pattern from CubeeCraft, Bazzill Swiss Dot CS, Love Elsie PP, Basic Grey pearls, Ranger Glossy Accents, Fiskars border edge punch, and the SNS December Mistletoe and Berries ribbon kit.

A cute little journaling title card.

Supplies: American Crafts CS, Bazzill CS, Love Elsie PP, CTMH ink, Fiskars border edge punch, Jenni Bowlin alpha stickers, American Crafts Thickers, Pebbles Inc. candy dot, Prima Sprites Antique Aqua flower, Misc pop dots, & SNS December Mistletoe and Berries ribbon kit.

A birthday card for my Grandma-In-Law.

Supplies: Prism CS, Basic Grey PP, Bazzill CS, Fiskars border edge punch, Fiskars circle punch, CTMH ink, Heidi Swapp stamp, WeRMemoryKeepers eyelets, Prima flower, Pink Paislee alpha stickers, Misc pop dots, & SNS December Mistletoe and Berries ribbon kit.

Another journaling title card.

Supplies: Prism CS, Unknown PP, Art Warehouse stamps, CTMH stamps, BlossomStamps stamp, Autumn Leaves stamp, Studio G stamp, CTMH ink, Maya Road Chipboard, Red Stickles, Copper Stickles, Misc. pop dots, Starbucks coffee sleeve cardboard, and SNS December Mistletoe and Berries ribbon kit.

And finally, a woodsy Christmas card to send out this holiday.

Supplies: Prism CS, American Crafts CS, Bazzill CS, Cosmo Cricket PP, Pebbles Inc. PP, Red Stickles, Basic Grey alpha stickers, Fiskars circle punch, Ranger Glossy Accents, Pink Paislee stamp, Staz On ink, CTMH ink, ZVA pearl, Misc. pop dots, Studio G stamp, and SNS December Mistletoe and Berries ribbon kit.

Read Full Post »

Do you like BRIGHT BRIGHT BRIGHT?!  Then you will love this kit!

{click image above to buy this kit}

Supplies: Cosmo Cricket Cosgmo PP & Diecuts, Love Elsie PP, Colorbok CS, Bazzill CS, Staz-on Ink, Autumn Leaves stamps, Marvy Corner Rounder, Paper Salon brads, misc. pop-dots.

Supplies:  Basic Grey PP, Bazzill CS, Marvy Corner Rounder, Zva Flower, Fiskars Circle Punch, Staz-on Ink, Studio G Stamps, Stickles, misc. pop-dots & rhinestones.

Supplies: Bazzill CS, Heidi Swapp PP, Zva Crystals, Studio G stamps, Marvy corner rounder, Stickles, Paper Salon brad, Bonanza Bag of Buttons Citrus button, misc. pop-dots.

Supplies: Bazzill CS, DCWV PP, Love Elsie PP, Stickles, Doodlebug alpha stickers, Prima sprites, Zva pearls, Autumn Leaves stamp, misc. paint & pop-dots.

Supplies: Bazzill CS, Cosmo Cricket PP, Making Memories PP, Stickles, Ranger Glossy Accents, Paper Salon brad, Glimmer Mists-white marshmallow, Fiskars circle punch, Studio G stamp, Staz-on ink, Making Memories Flower, Marvy corner punch, misc. pop-dots.

Supplies: Colorbok CS, DCWV PP, Basic Grey Pearls, Fiskars border edge punch, Zva flower, Fiskars circle punch, Marvy corner rounder, misc. pop-dots, chipboard, & joy button.

Supplies: Bazzill CS, Sam’s Club Paper Stack, Stampendous stamp, Staz-On Ink, Marvy Corner Rounder, Stickles, Prima sprites, Bonanza Bag of Buttons Citrus button, Basic Grey pearls.

Supplies: Bazzill CS, Colorbok CS, Sam’s Club Paper Stack, Miss Elizabeth’s sticker, Doodlebug alpha stickers, Fiskars circle punch, Fiskars border edge punch, Zva flower, Pressed Petals chipboard, Stickles, Marvy corner rounder, misc. rhinestones & pop-dots.

Supplies: Gerber baby food jar, Target Spot card kit Peace metal rimmed tag, Bazzill CS, Scrapworks (?) PP, Prima sprites, Glimmer Mists-white marshmallow, misc. paint.

I altered this little jar to fill with candy as an extra little gift for someone on Christmas. It’s really hard to photograph the effect Glimmer Mists really does on here.  It’s more sparkly sheer versus the opaque white that is showing in this photo.

Thanks for checking out my creations!

Read Full Post »

I love paper piecing.  It’s cute and saves money on buying embellishments so you can spend your money on pretty papers and ribbons!  It is also a great way to use up bits of paper scraps too. When picking out a stamp to paper piece, look for one that is more “cartoony” and is big enough to cut the different pieces.  The Imaginisce Snag ‘Em stamps in the shop, here, are great for paper piecing.  Using the paper piecing technique is also my monthly challenge on the SnS forum if you would like to join in.


coordinating patterned papers and cardstocks

paper trimmer

adhesives (one needs to be a heavy duty type to hold the seed beads if you are using them, Zip Dry Glue in the shop is a great one to use)



stamp (if using clear stamps, you’ll need your stamping block)

1 inch and 1.5 inch circle punches

coordinating ribbons

pop dots/3D foam

abc seed beads (you could also use abc sticker strips or very small stamped letters)

Other optional supplies: rhinestones, tweezers, Xacto/craft knife, corner punch, staples, other misc. decorating items

Step One:  Cutting the base of your card

I chose a black, white, and hot pink color combination for my card.  Cut the background cardstock for your card base (mine is black) 8.5 inches long and 5 inches wide.  Fold in half long-wise and flatten, perhaps using a bone folder.

Cut the patterned paper background (mine is the pink flowers) to 4.75 inches wide and 3.75 inches long.

Cut the background base for your paper piecing to lay on (mine is black corragulated) to 2.5 inches by 2.5 inches to make a square.

Optional: Corner punch the edges of your papers.  I like this look a lot.

Center and glue the patterned paper to your card base.

Step Two: Stamping your image

If there are any areas you do not want to use on your stamp, block them off.  I did not want the bird on the hippo’s head to show, so I placed a double sided mounting square over it on the stamp so it would not get inked.  Make sure you take off the mounting square before stamping or you will get a smudged ink square stamped on your paper.

Stamp the hippo stamp twice on the darker pink cardstock, once on the light pink cardstock, and once on the white cardstock.

I’m putting a little party hat on my hippo, so stamp the hat twice on the darker pink cardstock.  (These hat stamps are by Studio G.)

Step Three:  Cutting out your stamped images

Cut out around the outline of the first hippo on the darker pink cardstock.  This will be the base to glue down your paper piecing on to.  Cut out one of the party hat stamped images around the outline in the same fashion.

All of these pieces you will cut on the outline. Cut out the hippo on the light pink cardstock.  From the darker pink cardstock, cut out the circles of the ears, tail, and back hind legs from the second hippo you stamped earlier.  From the white cardstock, cut out the two teeth.  Cut out the second party hat image from the darker pink cardstock. You may want to use cutterbee scissors if you have them to make this step easier. Just a suggestion, but I keep my cut-out pieces on a strip of dark cardstock so I won’t lose them on my messy desk.

Optional step: Adding some visual interest to your hippo paper piecing

Lightly coat a dotted stamp (mine is from the Target dollar spot, so I don’t mind gunking it up too much) with white Stickles and stamp on top of the light pink hippo. You could also dot in the party hat and hippo’s eyes with black Stickles.

You could do this with Diamond Glaze or Glossy Accents as well.  Other options are using a light colored designed patterned paper, but make sure your stamped image will still show.  You could also use a  dotted, textured cardstock or run it through your Cuttlebug with a texture plate.  All of these options add a subtle detail so your paper piecing won’t be flat and boring. Keep in mind though, you don’t want this optional step to compete with the actual design of the stamped image.

Step Four: Assembling your paper piecing

Glue the darker pink party hat image (the one with the extra space around the outline) to the darker pink cardstock hippo base in the appropriate location. Glue the light pink hippo on top of the dark pink hippo base, matching up the outlines.  Glue the dark pink ears, hind leg, and tail on top of the light pink hippo’s matching areas.    Glue the white teeth on top of the light pink hippo teeth. This is where your tweezers may help you out a lot.

Step Five: Decorating your card

Punch out one 1.5 inch circle from a different patterned paper that coordinates.  Punch out one 1 inch circle from the darker pink cardstock.  Punch out one 1 inch circle from the light pink cardstock.  Ink the edges of the circles.

Tie a ribbon around the bottom of the black base square.  I used the light pink satin edge organza, found here in the SnS shop.

Adhere the 1 inch light pink circle in the upper left-hand corner of your card with a pop-dot/3D foam.  Place pop-dots/3D foam on the bottom two corners and upper right-hand corner of your black base square.  Apply just glue on the upper left-hand corner of the black base square where it will touch the light pink circle.  Place down your black base square now to the card base.

Apply glue lightly and slightly slip the 1.5 inch patterned paper circle under the ribbon tie (near the knot) on the lower right-hand side of the black square base.

Apply glue on half of the 1 inch darker pink circle and a pop-dot/3D on the other half.  Slip half of the darker pink circle slightly under the larger 1.5 inch patterned paper.  Let the other half of the darker pink circle lay on the actual card part with the pop-dot/3D foam.

Apply a pop-dot/3D foam on the upper left-hand side of the paper pieced hippo.  Apply glue to the back of the rest of the hippo.  Slightly overlap the hippo over the ribbon and larger circle and place the area with the pop-dot/3D foam to hang over the edge of the black base square.

Step Six: Adding a Sentiment to the card

Glue down (or however you prefer to adhere ribbon) 3 strips of white twill ribbon as shown above.  I used the white twill ribbon you can find in the shop, here.

Using a stronger holding adhesive, glue down your seed beads spelling out your card’s sentiment.  The good thing about twill is that if you can stamp on it if you don’t have these type ABC seed beads.

TADAH! You’re done and have a lovely card now!

Read Full Post »