Feeds:
Posts
Comments

Posts Tagged ‘glimmer mist’

I love shaped cards, but I don’t have a cricut to cut one out for me.  Tracing around chipboard shapes you can make your own.

Supplies:

Coordinating cardstock and patterned papers

Larger type chipboard shape (I used a car from a Maya Road chipboard book)

Scissors

Adhesive

Pop-dots/3D foam

Ink

sand paper

brads

alpha stickers (I used the Pink Paislee Fashion Script alphas)

stapler with staples

ribbon (I used the celadon grosgrain )

Glimmer Mist (optional)

circle punch

craft knife/xacto knife

pencil

Step One: Creating your card base

Choose your chipboard shape.  I picked out a car shape that is about the size of my hand.  When choosing a shape to use, take into account where it will be folded in the creation of your card to decide if your shape will leave enough space for stability.

I am using a double sided thicker type of patterned paper.  On the plain side of the paper, trace around your chipboard shape.  Then flip your chipboard shape, line it up,  and trace it again slightly overlapping over the top.

Cut it out and fold in half.

You may notice you didn’t cut or line up the two shapes exactly perfectly.  I know I didn’t!  Pick which side ends up not showing overlaps of the paper from below and make that be the your front side of the card.  You can use inking and sanding to hide these little flaws and add a cool technique to your card at the same time.

Step Two: Adding a layer to your card front

With a coordinating patterned paper, flip it over and trace your car chipboard shape once again.  This layer needs to be slightly smaller than your car shape card base.  If you don’t have a smaller chipboard shape of the exact same shape, as I didn’t, shift around your chipboard shape inside the bigger outline.  You may have to freehand some connecting lines or curves.  When done, cut this out.

The inner shape probably isn’t as exact as it could be, but again, we will hide our flaws with inking and sanding.  It’s fun to add a bit of texture to your card too by crumpling and un-crumpling your inner car shaped layer.

Now you have two pieces.  Place your inner car layer on top of the other layer.  The inner car layer is rounded where in the same spot on the card base it is flat to be the folded part.  So trace where this fold is at on the inner car base and snip it off.

Align inner smaller layer and adhere to card base.

Step Three:  Adding a sentiment

My card isn’t very large, so I chose a small sentiment, just the word “hi.”  You could use a smaller type stamp if you would prefer.

Punch (or trace and hand cut) a one inch circle from coordinating patterned paper.  Ink edges.  Apply alpha stickers off-centered on to the circle.

Overlap and bunch up your ribbon and staple so it stays in place.  Snip ribbon.  I like to do it at an angle just for a fun touch.

Apply adhesive to the bottom half of the circle and slip into the ribbon folds enough to where the alpha letters aren’t covered.  Apply two pop-dots/3D foam bits to the upper back half of the circle and adhere to your card top.

Pictured above is what we got done so far.  🙂

Step Four: Embellishing the card

I don’t like the staple lines showing through on the ribbon.  I will hide the staples and add some decoration to the card at the same time by applying brads.  Adding the brads will also help keep your ribbon in place and hold it to the card.  Using a craft knife will help you get your brad through the multiple layers.

This part is optional.  Add some sheen and shimmer to your card using glimmer mist.  I used the marshmallow white color, so I could really go crazy spraying away since it is so sheer!  If you are using a colored glimmer mist, be careful though, you don’t want to ruin your card.  You may want to test on a separate scrap of the papers you used in making your card to see how much you should spray to get the look you want to achieve.  Also be sure to spray your glimmer mist in a covered area as not to accidentally ruin your desk area or random papers you may have laying near your work area.  I used the top of an old box.

Give it plenty of time to dry.  If you sprayed too much and got shimmer globs, you can gently press down a paper towel to remove excess.  Be careful as not to smear or remove too much though.

All done!  A cute shaped card ready to send out to a friend!

Read Full Post »

First Off I want to say Where Did August Go? Summer flies by soooo fast!!

A Big Thank you to Magistical Memories for sponsoring the Design Team this past month!

Here’s the Lovely August SnS Lily Pads n Leapfrogs Kit I got to work on this month:

August SnS Lily Pads n Leapfrogs Kit

August SnS Lily Pads n Leapfrogs Kit

My First LO is Called “Grade Eleven”

I used Blue Grosgrain – #0289 & Blue – Green – White Multi Stripe Grosgrain – #0437 from the August SnS Lily Pads n Leapfrogs Kit. Also From SNS I used: Fancy Pants Designs ~ Sweet Pea 12×12 Paper ~Abigail, & Flocked the Owl with Flocking and Glitter Kit – The Basics. From Magistical Memories I used the Pineapple & Hoot. Also Used: Fancy Pants Rub Ons, Fiskars Punch, Stash Sticker, Making Memories Paint & Glaze Markers.

Next Up is :33:

Here I used: White Grosgrain – #0434, White Loop Braid – #0435, Black-Gray-Silver Jacquard & AC Thickers – Sprinkles from SNS. From Magistical Memories I used the Pointed Maggie Flower. Also Used: Black Card Stock, Silver Metallic Cardstock, MM Rub ons, Misc Transparency, Stash Bling (For Flower), Misc Ribbon.

Here is Sisters:

From the August SnS Lily Pads n Leapfrogs Kit I used the Celadon Grosgrain – #0290 & Blue Grosgrain – #0289. Patterned Paper is Me and My BIG Ideas 12×12 Paper Pad – Renee. (Of Course I had to buy that! lol – seriously – its has lots of beautiful papers in it!) From Magistical Memories I used Tab Trio Square. Also Used: Misc Stash Handmade & Patterned Paper, Swap Flower, Misc Button, Floss, K & C Flocked Sticker, MM Paint.

The following is called “BatDog”:

Ok Here is the story. Max Answers to “Bat Dog”, I’m been dying to do a Bat Dog LO for a while, and I finally found the right supplies. lol – that said. *giggles* here goes:

I used Black Lace, Black – Gold Metallic Braid & Tattered Angels Glimmer Mist – Lemon Zest from the SNS Store. I also Used Magistical Memories Desire Flower for the Tag. Also Used: Reminice Bat Crush PP, MAMBI STickers, Black Glaze Pen, Gold Sharpie, MM Paint, Ranger Distress Ink.

Thanks for reading:)

Read Full Post »